Our original, but far from ordinary Executive™ Series lasers are constructed with premium imported laser diodes and are the most powerful lasers money can buy. This is the ultimate tool for both long distance burning and maintains a very small dot at far distances. These lasers are available in four different output powers ranging from the Extreme <100mW to the dangerously intense Fusion <250mW.
The Executive™ Series green lasers are engineered with quality and precision to give our clients the most reliable greenie at the most affordable price. With their stylish redesigned casings, it's no wonder that almost every laser enthusiast owns at least one Executive™ series laser. Powered by only 2 AAA batteries, the Executive™ Series lasers is the world's lowest beam divergence green laser pointer. The green laser beam is able to travel long distances while maintaining excellent burning capabilities.
The FDA is the United States Department of Health and Human Services. FDA imports use accession numbers to confirm that a manufacturer has followed the reporting requirements for the product being imported.
The materials that make up the physical casing of the laser. The outer casing also serves as a heat sink for the laser module inside.
The final scratch-resistant finish applied to the laser casing.
Visible light has a wavelength range of 400-700 nanometers (nm). Between lasers of equal output power (in mW), lasers closest to the peak visibility wavelength of 555nm will have more range and brightness than other wavelengths of laser light. Green lasers (532nm) are closest to the peak visibility wavelength (555nm), and therefore brighter than red, blue, and purple lasers. A laser's wavelength and power are two of the most important factors in choosing a laser. Please click here to learn about how different wavelengths correspond with relative brightness.
In a laser with cylindrical symmetry, the transverse mode patterns are described by a combination of a Gaussian beam profile with a Laguerre polynomial. The modes are denoted TEMpl where p and l are integers labeling the radial and angular mode orders, respectively.
The maximum power level of the laser beam measured in milliwatts (mW). When choosing a laser a higher output power is brighter than a lower output power. For example, a 650nM @ 5mW laser is brighter than a 650nM @ 1mW laser.
The minimum power level of the laser beam measured in milliwatts (mW). When choosing a laser a higher output power is brighter than a lower output power. For example, a 650nM @ 5mW laser is brighter than a 650nM @ 1mW laser.
A measure of how fast the beam expands as the distance from the source increases. The divergence is measured in milliradians (mrad). A low beam divergence is useful for applications like pointing or free-space optical communications.
The width of the laser beam @ aperture measured in millimeters.
The Nominal Ocular Hazard Distance (NOHD) is the distance that a laser beam does not cause immediate or long term damage to a person. Calculated based on a 0.25 second accidental (unaided eye) exposure.
The maximum distance (in meters) at which the laser will produce 0.25 Lux of light. It's the standard that flashlights are measured against.
Required Eyewear O.D.:
Indicates whether or not laser protective eyewear is needed, and the necessary O.D. (optical density) of the eyewear for the laser wavelength being used. The indicated O.D. is the minimum O.D. sufficient to protect the user against a momentary intrabeam or specular reflection exposure.
The consumption of energy in the form of electricity. The average power consumption of an incandescent night light is 4W.
The source by which the laser is powered.
The average amount of time the battery can last on a single charge.
The switches that must be engaged to turn the laser on.
The available laser beam modes once the laser is activated.
The time cycle of which the laser can be active without causing damage to the laser module.
The average expected lifetime that the laser module can be in active use.
The time period for which any damaged or dysfunctional laser resulting from manufacturer's defects or workmanship will be replaced with a new product of the same model. Any attempted disassembly by a user will void the product warranty and may irreparably damage the product. We warrant all laser products sold on www.wickedlasers.com to be free of defects in material and workmanship.
Hold the beam dead still on a piece of red or black plastic - by just holding the plastic over the end of the laser - and it'll dig a tiny crater in it in a matter of seconds, or burn a pinhole right through it if it's thin, like a black garbage bag.